Do you have a question about the Goodman GMH81405DN Series and is the answer not in the manual?
Model | GMH81405DN Series |
---|---|
Efficiency | 80% AFUE |
Blower Motor | Multi-Speed |
Non-Condensing | Yes |
Blower Motor Type | PSC |
Ignition Type | Hot Surface Ignition |
Heat Exchanger Material | Aluminized Steel |
Fuel Type | Natural Gas |
Installation Type | Upflow/Horizontal |
Stages | Single-stage |
Warranty | 10-year limited heat exchanger warranty |
The GMH8 furnaces are equipped with an electronic ignition device used to light the burners and an induced draft blower to exhaust combustion products.
Details regarding the placement of the furnace relative to its surroundings for safe and efficient operation.
Specifies the minimum required distances from the furnace to combustible materials for servicing.
Explains the necessary adjustments and kits for operating the furnace at high altitudes.
Details trip points and part numbers for square nose and round nose pressure switches.
Lists part numbers and open settings for T.O.D. primary limit controls across different models.
Provides part numbers and open settings for rollout limit switches for various models.
Lists part numbers and open settings for auxiliary limit switches for different furnace models.
Details Goodman brand indoor coil compatibility with GMH8 furnaces using R22 and R-410A refrigerants.
Information on thermostat compatibility and required filter specifications for the furnace.
Explains the heating modes (Single Stage, Modified Two-Stage) and dipswitch settings for the furnace.