EasyManua.ls Logo

Goodman GMH81405DN Series - Blower Performance Specifications

Goodman GMH81405DN Series
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BLOWER PERFORMANCE SPECIFICATIONS
13
1. CFM in chart is without filters(s). Filters do not ship with this furnace, but must be provided by the installer.
2. All furnaces ship as high speed cooling. Installer must adjust blower cooling speed as needed.
3. For most jobs, about 400 CFM per ton when cooling is desirable.
4. INSTALLATION IS TO BE ADJUSTED TO OBTAIN TEMPERATURE RISE WITHIN THE RANGE SPECIFIED ON THE RATING PLATE.
5. The chart is for information only. For satisfactory operation, external static pressure must not exceed value shown on rating plate. The shaded area indicates
ranges in excess of maximum external static pressure allowed when heating. The data for 0.6" w.c. to 0.8" w.c. is shown for air conditioning purposes only.
6 The dashed (---) areas indicate a temperature rise not recommended for this model.
7. The above chart is for U.S. furnaces installed at 0-4000 feet. At higher altitudes, a properly derated unit will have approximately the same temperature rise at a
particular CFM, while the ESP at that CFM will be lower.
Tons AC
at 0.5" 0.6 0.7 0.8
ESP CFM RISE CFM RISE CFM RISE CFM RISE CFM RISE CFM CFM CFM
HIGH 3.0 1555 --- 1511 --- 1459 --- 1392 --- 1344 25 1279 1201 1120
GMH80453AN** MED 2.5 1165 28 1123 30 1100 30 1090 30 1048 32 1017 970 903
(MEDIUM) MED-LO 2.0 927 36 907 37 889 37 863 38 853 39 822 800 746
LOW 1.5 699 47 694 48 668 50 645 51 636 52 592 566 524
HIGH 3.0 1437 36 1310 39 1295 40 1310 39 1273 41 1202 1129 1039
GMH80703AN** MED 2.5 1127 46 1100 47 1095 47 1075 48 1050 49 1018 967 904
(MEDIUM) MED-LO 2.0 895 --- 917 --- 878 --- 867 --- 853 --- 830 786 743
LOW 1.5 694 --- 681 --- 663 --- 640 --- 625 --- 591 562 522
HIGH 4.0 2234 23 2151 24 2076 25 1990 26 1897 27 1803 1710 1569
GMH80704BN** MED 3.5 1676 31 1653 31 1648 31 1581 33 1555 33 1492 1414 1.35
(MEDIUM) MED-LO 3.0 1342 38 1335 39 1321 39 1313 39 1291 40 1261 1215 1149
LOW 2.5 1089 47 1085 48 1078 48 1071 48 1057 49 1040 986 932
HIGH 3.0 1593 42 1561 43 1567 42 1543 43 1493 44 1420 1343 1230
GMH80903BN** MED 2.5 118/6 56 1160 57 1160 57 1135 58 1118 59 1089 1045 983
(MEDIUM) MED-LO 2.0 957 --- 940 --- 937 --- 921 --- 895 --- 861 826 778
LOW 1.5 742 --- 710 --- 684 --- 663 --- 635 --- 611 578 476
HIGH 4.0 2182 --- 2127 31 2056 32 1974 33 1895 35 1809 1715 1588
GMH80904BN** MED 3.5 1645 40 1628 40 1615 40 1597 41 1541 43 1491 1440 1350
(MEDIUM) MED-LO 3.0 1320 49 1305 49 1310 49 1310 50 1295 51 1267 1217 1139
LOW 2.5 1063 60 1061 60 1057 61 1056 61 1039 61 1025 1005 948
HIGH 5.0 2334 --- 2334 --- 2284 --- 2135 --- 2051 35 1910 1748 1605
GMH80905CN** MED 4.0 1754 39 1735 39 1728 40 1685 40 1628 42 1551 1469 1346
(MEDIUM) MED-LO 3.5 1367 47 1380 47 1371 47 1374 48 1335 50 1293 1246 1165
LOW 3.0 1098 58 1109 59 1109 59 1088 60 1066 62 1050 998 916
HIGH 5.0 2481 --- 2395 35 2288 37 2217 38 2076 41 1999 1858 1732
GMH81155CN** MED 4.0 1738 49 1732 49 1709 50 1686 50 1639 52 1585 1492 1385
(MEDIUM) MED-LO 3.5 1364 62 1378 62 1372 62 1372 62 1350 63 1313 1261 1128
LOW 3.0 1137 --- 1142 --- 1140 --- 1114 --- 1090 --- 1056 954 860
HIGH 5.0 2554 41 2435 43 2375 44 2240 47 2152 49 2002 1883 1744
GMH81405DN** MED 4.0 1846 57 1773 59 1762 60 1712 61 1672 63 1583 1526 1442
(MEDIUM) MED-LO 3.5 1520 69 1500 70 1483 --- 1470 --- 1435 --- 1373 1308 1245
LOW 3.0 1301 --- 1274 --- 1260 --- 1231 --- 1207 --- 1177 1093 931
BLOWER PERFORMANCE
0.1 0.2 0.3 0.4 0.5
(CFM & Temperature Rise vs. External Static Pressure)
Model
Heating Speed
As Shipped
Motor
Speed
EXTERNAL STATIC PRESSURE (Inches Water Column)
()

Related product manuals