Need help?Do you have a question about the Goodman GSZ11 and is the answer not in the manual?
Table of contents for document sections including parts lists and illustrations.
List of functional components and their associated part numbers.
References to diagrams illustrating component placement and part identification.
Section detailing specific or non-standard components.
Explanation of model codes and their corresponding product identifiers.
Explanation of model codes and their corresponding product identifiers.
Explanation of model codes and their corresponding product identifiers.
Explanation of model codes and their corresponding product identifiers.
Table of contents for document sections including parts lists and illustrations.
List of functional components and their associated part numbers.
References to diagrams illustrating component placement and part identification.
Section detailing specific or non-standard components.
Explanation of model codes and their corresponding product identifiers.
Explanation of model codes and their corresponding product identifiers.
Explanation of model codes and their corresponding product identifiers.
Explanation of model codes and their corresponding product identifiers.
The GSZ11 Remote Heat Pump is a residential or light commercial heating and cooling system designed for outdoor installation. It operates as a split system, meaning it works in conjunction with an indoor coil and furnace or air handler to provide year-round comfort. The unit is specifically designed to use R410A refrigerant, a common and environmentally friendly hydrofluorocarbon (HFC) refrigerant. This necessitates the use of approved equipment and adherence to specific service procedures for any sealed system work, as detailed in the accompanying Service Manual or Installation Instructions.
The GSZ11 functions as a heat pump, capable of both heating and cooling a space. In cooling mode, it extracts heat from the indoor air and expels it outdoors. In heating mode, it reverses the process, extracting heat from the outdoor air (even in cold conditions) and transferring it indoors. This dual functionality makes it an energy-efficient solution for climate control. The system incorporates a compressor, a condenser coil, a fan, and various control components to manage the refrigerant cycle.
The GSZ11 series includes several models with varying capacities and electrical configurations, as indicated by their model numbers:
All models share common components such as a 24V relay (0130M00025S), a 40 AMP, 3P, 24V contactor (CONT3P040024VS), a defrost control board (PCBDM133), a defrost thermostat (B1370803), an expansion valve (0151R00029), and a 26-inch fan blade (B1086768). Safety features include high-pressure (0130M00089) and low-pressure (0130M00088) cutout switches. The unit's construction includes a 35-inch base pan (0121R00007PDG), a venturi top panel (0121R00013PDG), and louvered side panels (0121R00043PDGB, 0121R00047PDGB, 0121R00051PDG) for protection and airflow.
The GSZ11 is designed for remote installation, typically outdoors on a concrete pad or similar stable surface. Its robust construction, including the louvered side panels and wire grill, protects internal components from environmental elements while allowing for proper airflow. The unit's operation is managed by a defrost control board, which intelligently initiates defrost cycles to prevent ice buildup on the outdoor coil during heating mode in cold weather, ensuring efficient operation. The inclusion of a crankcase heater helps prevent refrigerant migration to the compressor oil during off-cycles, which can lead to compressor damage upon startup. Service valves (1 1/8" and 5/8") are provided for easy connection to the refrigerant lines. An accumulator (B1226212) is integrated into the system to protect the compressor from liquid refrigerant slugging. A filter drier (B1219227) ensures the cleanliness and dryness of the refrigerant circuit.
Maintenance of the GSZ11 heat pump should be performed by qualified technicians only, using authorized factory parts. The unit features a lower access panel (4400211PDG) and a control cover (0121R00053PDG) for easy access to electrical and control components during service. The defrost control board (PCBDM133) is a key component that can be replaced if diagnostic codes indicate a fault. The capacitor (CAP200000440RPS) and contactor (CONT3P040024VS) are also accessible for inspection and replacement. The fan motor and blade are designed for durability, but replacement parts are available if needed. Compressor grommets (0164M00018) and bolts (B1393740) are used for vibration isolation and can be replaced if wear or damage occurs. The filter drier (B1219227) is a consumable component that should be replaced whenever the sealed refrigerant system is opened for service. A sight glass (B1372801, NS) may be present on some units to allow technicians to visually inspect the refrigerant charge. For any warranty service or repairs after the warranty expires, Goodman Manufacturing Company, L.P. strongly recommends contacting an authorized technician and using genuine factory parts to ensure optimal performance and longevity of the unit. The manual provides contact information for consumer affairs and international divisions for assistance.
To Next Page
General