Goodmans 330377 - Using the Action Camera; Recording a Video; Playing Back Media (Playback Mode); Changing the System Settings

4.3 Recording a Video
1. Press and hold the Power/Mode button to turn the Waterproof
Action Camera on.
2. Access Video mode by pressing the Power/Mode button.
3. To begin recording, press the Shutter/Select button.
4. Stop recording by pressing the Shutter/Select button.
4.4 Playing Back Media (Playback Mode)
1. Press and hold the Power/Mode button to turn the Waterproof
Action Camera on.
2. Access Playback mode by pressing the Power/Mode button.
3. View the files using the Up and Down buttons.
4. Press the Shutter/Select button to playback a video.
5. Stop a video by pressing the Shutter/Select button.
4.5 Changing the System Settings
1. Press the Power/Mode button until the desired mode is selected.
2. Access the system settings menu for that mode by pressing
the Down button until the list of settings are displayed.
3. Press the Shutter/Select button to cycle through mode and
system settings.
4. Use the Up and Down buttons to browse through the selected
settings menu.
5. To choose the menu option, press the Shutter/Select button.
Settings Function
Sounds A beep sound will be audible every time that
a button is pressed. Silence the sound by
turning the feature off.
Power Frequency This is the rate at which an imaging device
displays consecutive images called frames.
There are two frequency setting to
choose from:
50 Hz
60 Hz
Power Save Choose a predetermined length of time
when the Action Camera will automatically
shutdown, if not in use.
The user can choose between 1, 3 or
5 minutes.
FULL HD ACTION CAMERA