There are no parts inside the equipment which require additional maintenance.
8.2 Maintenance
џ The charger should be placed in a dry room for storage. Any corrosion must be
cleaned off the charging terminals.
9. Troubleshooting
If the equipment is operated properly you should experience no problems with
malfunctions or faults.
In the event of any malfunctions or faults, please check the following before you
contact your customer services.
Fault
Possible cause
Remedy
Equipment
does not
charge up
Charger clamps connected
incorrectly
Contact between
the charger clamps
Battery defective
Connect the red clamp to the
positive pole and the back
clamp to the bodywork
Prevent contact
Have the battery checked by
an expert and replace it if
necessary
To Next Page
Loading...
