Google NLS-1304-25 User Manual

Let's get you set up with your new Google Wifi system. Here’s what you’ll need to get started:
 Google Wifi point(s)
 Google Account
 Google Wifi app for Android 4 and up or iOS 9 and up
 Broadband connection
 Modem (Note: The Google Wifi point is not a modem. To use it, you’ll have to connect
it to a modem with an Ethernet cable. This can be a standalone modem or a
modem+router combo provided by your ISP. Don’t have a modem? Some apartment
buildings and dorms don’t require modems for broadband connections. If this is the case,
you can plug the Google Wifi point directly into your wall’s Ethernet jack.)
 Ethernet cable for the primary Wifi point (provided)
 Power adapter for each Wifi point (provided)
Note: We strongly recommend purchasing Google Wifi from the country where you'll be using
it. Since wireless regulations vary by country, you may experience compatibility issues if you
move your Wifi device(s) to a different country and Google will be unable to offer support. If
you're setting up a mesh network, we recommend purchasing all of your Wifi points in the same
country.
Setting up just one OnHub? See how to set that up here.
Step 1: Find a spot for your Wifi point
Your primary Wifi point needs to be connected to a modem. Depending on the length of the
Ethernet and power cables, this may limit where you're able to place it.

Google NLS-1304-25 Specifications

General

Brand	Google
Model	NLS-1304-25
Category	Wireless Router
Language	English

Summary

Find a Spot for Your Wifi Point

Connect Your Primary Wifi Point

Connect Ethernet Cable

Connect the provided Ethernet cable to the Google Wifi point's WAN port and your modem.

Power and Position Wifi Point

Plug the Wifi point into power and place it in an open, visible location for optimal signal.

Download and Connect Google Wifi App

Download Google Wifi App

Download the Google Wifi app for Android or iOS to begin the setup process.

Sign In to Google Account

Open the app, accept terms, and sign in to your Google Account to proceed.

Scan QR Code for Connection

Use the app to scan the QR code on your Wifi point to automatically connect your phone.

Choose Wifi Point Location

Set Up Wi-Fi Network

Create Wi-Fi Network Name

Choose a unique name for your Wi-Fi network during the setup process.

Create Wi-Fi Password

Create a strong, secure password for your Wi-Fi network.

Set Up Additional Wifi Points

Add More Wifi Points

Select how many additional Wifi points are needed and follow in-app instructions to add them.

Test Wifi Point Connectivity

Test the connection strength of new Wifi points to ensure optimal performance.

Review Network and Install Software

Review Your Wi-Fi Network

View an overview of your Wi-Fi network and all configured Wifi points after setup.

Install Google Wifi Software

The app downloads and installs the latest Google Wifi software for features and security.