Gooligum Electronics Baseline and Mid-Range PIC - Page 25

© Gooligum Electronics 2015 www.gooligum.com.au
Baseline and mid-range PIC training and dev board operation guide Page 25
1
DC power jack (2.1 / 5.5 mm)
1
1 × 16-pin 0.1” pitch header socket
1
1 × 6-pin 0.1” pitch right-angle header
1
1 × 32-pin 0.1” snappable header (snap into 16 × 1×2 headers)
1
1 × 9-pin 0.1” snappable header (snap into 3 × 1×3 headers)
1
2 × 19-pin 0.1” snappable header (snap into 1 × 2×3, 1 × 2×4, 1 × 2×6, and 3 × 2×2 headers)
1
13 mm PCB ext drive piezo sounder (e.g. muRata PKM13EPYH4000)
1
8-pin DIP IC socket
1
14-pin DIP IC socket
2
6 mm PCB-mount tactile pushbutton switches
Accessories
Qty
Description
4
self-adhesive rubber feet
1
2” × 3” solderless breadboard
22 AWG solid-core insulated jumper wire
20
header shunts