Gooligum Electronics Baseline and Mid-Range PIC - Page 27

© Gooligum Electronics 2015 www.gooligum.com.au
Baseline and mid-range PIC training and dev board operation guide Page 27
Additional components required for PWM lesson motor-control examples (optional)
Qty
Description
2
PSMN022-30PL (or similar) N-channel logic level MOSFETs
2
NDP6020P (or similar) P-channel logic level MOSFETs
1
SN754410 (or L293D) quad half-H driver with internal clamp diodes
1
MDN3BL3CSAS (or similar) 2 - 5 V brushed DC motor with wire leads
1
1N400x series rectifier diode
4
220 Ω 5% 1/4W resistors
2
10 kΩ 5% 1/4W resistors