GOOROO CONTROLLERS LIO BOX - 10- TROUBLESHOOTING; LIOBOX Not Turning On; Red Cross Indicator; Track Name Not Displayed

To Next Page

To Previous Page

10 – TROOBLESHOOTING

The LIOBOX does not turn on:

• Check the wiring. Preferably use the supplied wiring, or a cable shorter than 1.5m.

A red cross appears at the top of the screen at startup, check :

• That the Ableton software is started.

• That you have loaded the right script in the MIDI part, in and out.

• If using a HUB or MIDI card, check the wiring to the computer.

Track name is not displayed, check :

• That a name is well informed

• That the naming procedure has been respected.

• That you have not masked the name by adding the prefix "()"

An "attention" symbol appears at the top of the screen, please check :

• That the two sessions (Main / Spare) have the same track names, and in the same order.

• After modification, you will have to refresh the box using the "refresh" function. Depending on the

number of tracks, you may need to do several refreshes in a row.

• That the two computers are in the same mode (arrangement or session).

The name of a track in the setlist is displayed in red, check :

• That the track was not deleted from the Ableton session.

• That you haven't changed the name, or the track info.

• That you haven't moved a track.