BIND
6
EN
WWW.GOO-SKY.COM
Transmitter description - 5 遥控器说明 -5
Turn on and off: press and hold power-1 (A) and power-2 (B) at the same time to turn on the
power of the remote control (turn on), or turn off the power of the remote control (turn off);
按 POWER-1 A POWER-2 B 遥控器 ( )遥控器
( )
Turn on the GOOSKY T8 transmitter, press the BIND button for 3 times after the helicopter is
powered on. The blue light flashes quickly. Keep the transmitter less than one meter away from the
flight control. The flight control passes self-detection when the blue light is solid on. Then the
binding is done.
T遥控器 连按3次 按遥控器控
控
遥控器开机、关机介绍
Turn on and off the remote control
飞控对频介绍
Introduction to flight control binding
D/R
70%
85%
100%
Pose mode
Manual mode
Manual mode
遥控器
Remote Control Power Light(Red)
POWER-1
A
POWER-2
B
Flying Ring
Throttle, Left Right
Front Back, Orientation
IDLE
HOLD
(MODE 1 )
To Next Page
Loading...