MODE1 MODE2
8
EN
WWW.GOO-SKY.COM
Transmitter description - 7 遥控器说明 - 7
左、右手 互换
Mode1 and mode2 are interchangeable
MODE1 MODE2
!
CAUTION
1: Disassemble the left and right assembly seats of the remote control, and
unplug the connecting wire plug;
1 遥控器
2: The left and right assembly seats are installed interchangeably, and then the
assembly seat is assembled on the front shell, and the connecting wire is
inserted;
2
3: Adjust the positions of mode1 and mode2 shift key switches to correspond to
the left and right hands of the remote control one by one;
3 MODE1 MODE2 遥控器
4: After assembly, recalibrate the control stick ;
4
(MODE 2 )
To Next Page
Loading...