With the Wi-Fi BacPac attached to an Original HD HERO
camera, you can wirelessly connect to the Wi-Fi Remote.
The Wi-Fi Remote gives you control of up to 50 cameras at
a time from a range of up to 600/180m.
Your Wi-Fi BacPac and Wi-Fi Remote arrive pre-connected
in the Wi-Fi Combo Kit. Follow the steps below only if you
want to connect additional Original HD HERO cameras or
connect with a new Wi-Fi Remote.
Connecting your Wi-Fi Remote to additional Original HD
HERO cameras:
1. Place your Original HD HERO with Wi-Fi BacPac
into Connection Mode:
a. Make sure your Wi-Fi BacPac is attached to your
GoPro camera and powered ON.
b. Enter the HD HERO camera settings using the
POWER/MODE button. Press SHUTTER/SELECT to
enter the Settings Menu.
c. Toggle to the Wi-Fi Menu using the POWER/MODE
button. Press SHUTTER/SELECT to enter into the
Wi-Fi menu.
Original HD HERO
+ Wi-Fi Remote
27
To Next Page
Loading...
