18 19
CAPTURING VIDEO
The default video resolution is 1080p30. To select a different resolution,
see Changing Camera Settings (page 30).
To Start Recording Video:
Press the Shutter/Select button [
]. Your camera powers
on, emits three beeps, and automatically begins recording video.
The camera status lights blink while the camera is recording.
If the memory card is full or the battery is out of power, your
camera automatically stops recording and saves the video before
powering off.
/ Capturing Video / Capturing Video
To Stop Recording:
Press the Shutter/Select button [
]. The camera stops recording,
beeps several times, and automatically powers off to maximize
battery life.
PRO TIP: Videos captured at lower resolutions such as 720p30 fps are
supported by more mobile devices and are easier to share and upload
to the web.
To Next Page
Loading...
