36 37
CONNECTING AFTER PAIRING
Aer connecting your camera to the app or remote for the first time,
you can connect in the future through the wireless menu.
To Connect Your Camera aer Pairing:
1. On the camera, press the Info/Wireless button to display the
status screen, then press it repeatedly until you get to the setting
that you want (App, RC, or App & RC).
2. Press the Shutter/Select button [
] to select it.
Note: App & RC appears only if you paired your camera with a smartphone/tablet that uses Bluetooth
®
LE. With this option, you can connect your camera to either the app or remote.
The wireless status lights (blue) blink when wireless is on and the
camera is not recording.
/ Accessing All Modes and Settings
VIDEO SETTINGS
Video mode contains two capture modes: Video and Looping video.
You can change all Video mode settings by connecting HERO Session
™
to the GoPro App for mobile or a GoPro remote.
Resolution, FPS, and FOV
Video
Resolution
FPS
(NTSC/PAL)
FOV
Screen
Resolution
1440p 30/25 Ultra Wide 1920x1440, 4:3
1080p SuperView
™
48/48
30/25
Ultra Wide 1920x1080, 16:9
/ Video Settings
To Next Page
Loading...
