GoPro HERO 6 Installation Guide

6. Fully tighten the thumbscrew
using a Phillips-head
screwdriver to secure the
Camera’s position on the
mount.
5. Insert thumbscrew and hand
tighten.
4. Place Picatinny mount onto the
base of the Camera, ensuring
that screw holes are aligned.
1. Remove Camera from
packaging. Camera will come
equipped with a pre-installed
plastic mount.
3. Open Picatinny mounting kit
and take out the thumbscrew
and Picatinny mount.
2. Remove plastic mount from
the Camera by removing the
thumbscrew and mount from
the base of the Camera.
HD Action Camera
Installation Guide
D00133 Rev. A
INSTALLATION
To install the HD Action Camera on an LRAD’s Picatinny rail, perform the following steps.
NOTE: Prior to installation on LRAD, insert memory card and fully charged battery into Camera

GoPro HERO 6 Specifications

General

Video resolutions	800 x 480, 1280 x 720, 1920 x 1080, 2560 x 1440, 3840 x 2160 pixels
Maximum frame rate	240 fps
Supported video modes	480p, 720p, 960p, 1080p, 1440p, 2160p
Video formats supported	AVC, H.264, H.265, HEVC, MP4
Maximum video resolution	3840 x 2160 pixels
Bitrate at maximum video resolution	60 Mbit/s
Photo mode	Yes
Sensor type	-
Total megapixels	12 MP
Image formats supported	RAW
Product color	Black
Waterproof up to	10 m
Country of origin	China
Protection features	Splash proof, Water resistant, Waterproof
Combined Nomenclature (CN) code	85258099
Flip-out screen	No
Display diagonal	2 \
Storage media	Memory card
Compatible memory cards	MicroSD (TransFlash)
Frequency band	2.4/5 GHz
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
USB connector type	USB Type-C
Micro HDMI ports quantity	1
Image processor	GP1
Package type	Blister
Package depth	50.8 mm
Package width	101.6 mm
Package height	203.2 mm
Package weight	498 g
Battery capacity	1220 mAh
Harmonized System (HS) code	852580

Weight and Dimensions

Width	- mm
Weight	- g
Battery weight	22 g