Do you have a question about the GoPro HERO+ and is the answer not in the manual?
Video resolutions | 1280 x 720, 1920 x 1080 pixels |
---|---|
Maximum frame rate | 60 fps |
Supported video modes | 720p, 1080p |
Video formats supported | H.264, MP4 |
Maximum video resolution | 1920 x 1080 pixels |
Photo mode | Yes |
Sensor type | - |
Total megapixels | 8 MP |
Image formats supported | JPG |
Maximum image resolution | 3264 x 2448 pixels |
Still image resolution(s) | 3264 x 2448 |
Lens type | Wide-angle |
USB connector type | Micro-USB |
USB 2.0 ports quantity | 1 |
GPS (satellite) | No |
Storage media | Memory card |
Compatible memory cards | MicroSD (TransFlash) |
Maximum memory card size | 64 GB |
Product color | Black |
Waterproof up to | 40 m |
Protection features | Waterproof |
Battery voltage | 3.8 V |
Battery capacity | 1160 mAh |
Battery life (max) | - h |
Video recording time | 2.5 h |
Cables included | USB |
Package depth | 101 mm |
Package width | 50.8 mm |
Package height | 244.5 mm |
Width | - mm |
---|---|
Weight | 123 g |
Identifies and explains the main buttons, ports, and displays of the camera.
Instructions on how to charge the integrated battery using the included USB cable.
Details requirements for microSD cards, including type, capacity, and speed rating.
Details how to use the rear touch display for control, preview, and playback, including gestures.
Step-by-step guide to navigating settings using the touch display interface.
Instructions on how to navigate settings menus using the camera's physical buttons.
Steps to start and stop video recording, including status light and beep indicators.
Instructions on how to capture a single 8MP photo with Ultra Wide FOV.
Steps to download, open, and connect the camera to the GoPro App for remote control.
Instructions on downloading, installing, and using GoPro Studio to transfer files.
Details video resolutions, frame rates (FPS), and field of view (FOV) options.
Configures wireless connections for GoPro App, remote control, and Wi-Fi reset.
Advises on maintaining the waterproof seal and cleaning the housing to prevent water damage.
Advises on proper storage and handling of the integrated battery and camera to prevent damage.
Solutions for the camera not powering on or responding to button presses, including reset procedures.
Addresses issues like choppy playback, forgotten passwords, and blinking blue lights after powering off.