GoPro Hero 3+ User Manual

Slot for inserting micro SD cards for image and video storage.

Provides 100min recording time, 120min to fully charge via USB.

Displays video recording status, resolution, frame rate, and battery life.

Shows photo capture status, resolution, and remaining photos.

Indicates video mode and shows clips, time, resolution, frame rate, and battery.

Settings include PAL/NTSC, Resolution, Frame Rate, Field of View, Protune.

Shows photo mode icon, shots taken, resolution, and battery life.

Press Shutter for single photo, press/hold for continuous shots (set frequency in settings).

Settings include Resolution, Field of View, and Shot Frequency.

Takes multiple photos continuously when Shutter is pressed.

Set the number of photos per second (e.g., 3/1sec, 10/1sec).

Camera takes photos automatically at selected intervals.

Set the interval between photos (e.g., 0.5 sec, 1 sec, 60 sec).

Choose between PAL and NTSC video standards based on region.

Select from various resolutions like 4K, 2.7K, 1440p, 1080p, and WVGA.

Choose frame rates per second (e.g., 24, 30, 60, 120 fps) for NTSC/PAL.

Select Wide, Medium, or Narrow field of view using a central sensor area.

Enables RAW-like image characteristics, greater dynamic range, and manual adjustments.

Turn Protune on/off or reset its manual settings via the Capture Settings menu.

Select photo resolution (e.g., 12MP, 7MP, 5MP) and corresponding Field of View.

Use micro SD cards up to 64GB; card speed (Class 10, UHS Class 1) is crucial.

Format card to cancel, delete last file, or delete all files and format.

Table detailing resolutions, PAL/NTSC frame rates, Protune support, and FOV.

Guidance on optimal use for various video formats based on field work.

Table showing recording durations for different video formats on 32GB/64GB SD cards.