13
*EN 50242 : This programme is the test cycle. The information for comparability test
in accordance with EN 50242, as follows:
Capacity: 12 setting
Position Upper basket: upper wheels on rails
Rinse aid setting: 6
Pl:0.49w; Po:0.45w.
Starting a cycle wash
Means: need to fill rinse into the Rinse-Aid Dispenser.
( )
1 Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one (see the section entitled
Loading the Dishwasher ).
2 Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid ).
3 Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification
of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4 Open the door, press the ON/OFF Button, and the display windows will light.
5 Press the program Button , the wash program will be changed as follows direction:
If a program is selected, the LED will light. Then close the door, the dishwasher
begins to start.
“ ”
“ ”
Intensive->Normal->ECO->90Min->Rapid;
Normal
5/25g
5/25g
5/25g
For normally soiled loads,
such as pots plates
glasses and lightly
soiled pans.
、 、
For heaviest soiled crockery,
and normally soiled pots
pans dishes etc with dried
on soiling.
、
、
A shorter wash for lightly
soiled loads and quick
wash.
Pre-wash(50 )
Wash (60 )
Rinse
Rinse
Rinse(65 )
Drying
℃
℃
℃
Pre-wash(45 )
Wash (55 )
Rinse
Rinse (65 )
Drying
℃
℃
℃
Pre-wash
Wash (45 )
Rinse(65 )
Drying
℃
℃
Wash (45 )
Rinse
Rinse (55 )
℃
℃
180
185
160
40
1.25
0.91
1.5
0.75
18.5
15
11
11.5
Wash(65 )
Rinse
Rinse (65 )
Drying
℃
℃
90 12.5
1.35
30g
20g
Intensive
90Min
ECO
(*EN 50242)
This is standard programme, it is
suitable to clean normally soiled
tableware and it is the most efficient
programme in terms of its combined
energy and water consumption for
that type of tableware.
Rapid
For normally soiled loads
that need quick wash.
To Next Page
Loading...
Need help?
General
