What does error code F12 mean on my Gorenje Dishwasher?
If your Gorenje Dishwasher displays error code F12, check that the water tap is on. Also, check that the outer filter on the inlet hose is not blocked. If the problem persists, call the service department.
How to remove grease deposits in my Gorenje Dishwasher?
To address grease deposits in your Gorenje Dishwasher, select a high-temperature program to dissolve grease on very dirty dishes, such as Intensive wash. Alternatively, run a self-cleaning program.
How to remove sticky white film from dishes in Gorenje GV631E60?
To address a sticky white/blue film on dishes from your Gorenje Dishwasher, reduce the rinse aid dosage. If you have very soft water, consider diluting the rinse aid 50:50 with water.
Why does my Gorenje GV631E60 Dishwasher leave spots or films on the dishes?
To resolve spots or films on dishes from your Gorenje Dishwasher, check that the salt compartment lid is properly tightened. An incorrect water softener setting can also cause this issue. You can find information on how to adjust this setting in the Settings chapter. The rinse aid dosage setting may also be incorrect and can be adjusted in the Settings chapter. Ensure the salt compartment is not empty and top it up if needed, as described in the Before washing for the first time chapter. If you are using 3-in-1/ All-in-one detergent with the TAB setting activated, inactivate the setting and add salt and rinse aid. High temperatures or too much detergent can etch crystal, so wash crystal at a low temperature with a conservative amount of detergent.
Why are the dishes not dry enough in my Gorenje GV631E60?
If your Gorenje Dishwasher isn't drying dishes well enough, activate the Extra dry option. Make sure that you fully load the dishwasher. Check the rinse aid level and top it up if necessary, or increase the dosage, referring to the Before washing for the first time and Settings sections for guidance. If you're using a 3-in-1/All-in-one detergent with the TAB setting activated, try inactivating the TAB setting and adding salt and rinse aid separately.
How to remove spots left after washing in Gorenje GV631E60 Dishwasher?
To remove spots left after washing in your Gorenje Dishwasher, use a detergent with a bleaching agent.
What does error code F67 mean on my Gorenje GV631E60?
If your Gorenje Dishwasher displays error code F67, check that the water tap is on. Also, check that the outer filter on the inlet hose is not blocked. If the problem persists, call the service department.
How to prevent spots on silver in Gorenje GV631E60?
To prevent spots on stainless steel or silver in your Gorenje Dishwasher, rinse off foodstuffs like mustard, mayonnaise, lemon, vinegar, salt, and dressings if you're not starting the dishwasher immediately. Consider using the One hour program with the SpeedWash option.
What does error code F10 mean on my Gorenje GV631E60?
If your Gorenje Dishwasher displays error code F10, it indicates overfilling. Clear the drainage pump. If the problem persists, call the service department.
Why is my Gorenje GV631E60 making a rattling sound?
To stop your Gorenje Dishwasher from making rattling sounds, check that the dishes are placed securely. Spin the spray arms to make sure they can rotate freely.
General| Capacity | 13 place settings |
|---|---|
| Number of washing programs | 6 |
| Upper basket adjustable height | Yes |
| Delay Start | Yes |
| Half Load Option | Yes |
| Child Lock | Yes |
| Appliance placement | Built-in |
| Product size | Full-size |
| Drying system | TotalDry |
| Width | 596 mm |
| Depth | 550 mm |
| Height | 815 mm |
To Next Page
