What does "CLn" mean on my Gorenje Dishwasher?
If your Gorenje dishwasher displays "CLn", it means the dishwasher tub, spray arms, and spray pipes require cleaning. Run a self-cleaning program to address this.
What to do if water remains in Gorenje Dishwasher?
If your Gorenje dishwasher has water remaining after a cycle, the filters might be blocked. Clean the coarse and fine filters. Ensure the filters are correctly fitted and locked. Check the drainage pump for debris and clean it if necessary. Also, make sure the drainage pump stop is in place. Inspect the drainage hose for kinks or blockages, ensuring it has an inner diameter of at least 14 mm where it connects to the sink unit's water trap.
Why the buttons do not react when pressed on Gorenje GV67260 Dishwasher?
If the buttons on your Gorenje dishwasher aren't responding, it might be because you pressed them too soon after opening the door. Wait a moment before trying again. The buttons might also be dirty; clean them with a dry or slightly damp cloth. Also, the buttons only work when the door is open.
Why are the dishes not clean in my Gorenje GV67260?
If your Gorenje Dishwasher isn't cleaning dishes properly, several factors could be at play. First, the spray arms might not be rotating because they are blocked. Remove and clean them. Also, check if the spray arm holes or bearings are blocked and clean them. An unsuitable dishwashing program or incorrect detergent dosage could also be the reason. Choose a longer program and adjust the detergent based on water hardness. Old detergent, incorrect loading, or items toppling over during the wash can also affect cleanliness. Make sure the filters are correctly fitted and that the drainage pump stop is in place.
How to fix Gorenje Dishwasher cannot close door?
If your Gorenje dishwasher door won't close, the baskets might not be correctly positioned. Ensure they are horizontally aligned. If the door lock isn't clicking into place, open the door, press and hold the Auto open button for 15 seconds, wait 30 seconds, and then close the door again to see if the lock engages.
Why are there spots or films on the dishes from my Gorenje Dishwasher?
If you notice spots or films on your dishes after washing in your Gorenje dishwasher, it could be due to several reasons. The water softener might be leaking salt; ensure the salt compartment lid is properly tightened. The water softener or rinse aid dosage settings might be incorrect; refer to the Settings chapter for adjustments. The salt compartment might be empty; refill it as described in the Before washing for the first time chapter. If you're using 3-in-1/All-in-one detergent with the TAB setting activated, try inactivating the TAB setting and adding salt and rinse aid separately. High temperatures or excessive detergent can also cause etching on crystal; wash crystal at a lower temperature with less detergent.
Why do I hear a fan sound from my Gorenje Dishwasher when it's not running?
If you hear a fan sound from your Gorenje dishwasher even when no program is running, the special program ION might be activated. See the chapter Using the dishwasher for details.
Why is there a bad odour outside my Gorenje GV67260 Dishwasher?
If you notice a bad odor outside your Gorenje dishwasher, it could be due to the special program ION being activated in a confined space with insufficient ventilation. Deactivate the special program ION.
Why is there detergent residue in the detergent compartment of my Gorenje GV67260 Dishwasher?
If you find detergent residue in the detergent compartment of your Gorenje dishwasher after washing, it's likely because the compartment was damp when you added the detergent. Make sure the detergent compartment is dry before adding detergent.
How to stop Gorenje GV67260 from overfilling?
To address overfilling in your Gorenje dishwasher, clear the drainage pump. If the issue continues, contact the service department.
General| Brand | Gorenje |
|---|---|
| Model | GV67260 |
| Category | Dishwasher |
| Language | English |
To Next Page
