EasyManua.ls Logo

Gorenje GV672C61 - User Manual

Gorenje GV672C61
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User manual
Dishwasher
GV672C61

Questions and Answers

  • A
    April ValdezAug 18, 2025
    What to do if the Gorenje Dishwasher control panel does not react?
    • M
      mccoykimberlyAug 19, 2025
      If the control panel of your Gorenje Dishwasher isn't responding, here are a few things to try: * If you've just opened the door, wait a moment before pressing the control panel. * Make sure the door is open, as the control panel only works when the door is open. * Clean the control panel with a dry or slightly damp cloth to remove any dirt.
  • P
    Paul ThompsonAug 21, 2025
    Why does my Gorenje GV672C61 show F12?
    • D
      David FrederickAug 21, 2025
      The F12 error code on your Gorenje Dishwasher indicates a water inlet fault. Ensure the water tap is turned on and check the outer filter on the inlet hose for any blockages.
  • G
    Gregory Diaz MDAug 23, 2025
    Why does my Gorenje GV672C61 Dishwasher show F67?
    • H
      Heather FinleyAug 23, 2025
      The F67 error code on your Gorenje Dishwasher indicates a water inlet fault. Ensure the water tap is turned on and check the outer filter on the inlet hose for any blockages.
  • B
    brenda22Aug 26, 2025
    What does error code F10 mean on a Gorenje GV672C61?
    • C
      Cameron ThomasAug 26, 2025
      Error code F10 on your Gorenje Dishwasher indicates overfilling of water. Try unblocking the drainage pump.
  • A
    Amy HickmanAug 27, 2025
    What does error code F52 mean on a Gorenje GV672C61 Dishwasher?
    • S
      Shelia MillerAug 28, 2025
      Error code F52 on your Gorenje Dishwasher indicates a water level fault. You should clean the coarse and fine filters and check the outer filter on the inlet hose to ensure it is not blocked.
  • J
    Jennifer MaloneAug 30, 2025
    What does error code F11 mean on a Gorenje GV672C61 Dishwasher?
    • J
      Jerry WeberAug 30, 2025
      The error code F11 on your Gorenje Dishwasher indicates a water outlet fault. Check "Water remains in the dishwasher" under "Problem" in the table below.
  • D
    Donna DunnSep 1, 2025
    What does error code F40 mean on a Gorenje GV672C61?
    • J
      Jason HooperSep 2, 2025
      Error code F40 on your Gorenje Dishwasher indicates an inlet valve leakage. Turn off the water tap.
  • M
    mackenziecooperSep 4, 2025
    What does error code F41 mean on a Gorenje Dishwasher?
    • H
      Holly EstradaSep 4, 2025
      Error code F41 on your Gorenje Dishwasher indicates a heater fault. Turn off the water tap and remove the plug from the wall socket.
  • A
    Amanda WilsonSep 6, 2025
    What to do if Gorenje GV672C61 Dishwasher shows F54?
    • M
      Michelle DeckerSep 6, 2025
      If your Gorenje Dishwasher is showing error code F54, this indicates overfilling of water. Turn off the water tap. To avoid water leakage outside the dishwasher, do not remove the plug from the wall socket until the water tap on the supply line has been turned off!
  • K
    kristen74Sep 8, 2025
    Why I cannot close the door of my Gorenje Dishwasher?
    • R
      Ryan EnglishSep 9, 2025
      If you're unable to close the door of your Gorenje Dishwasher, the baskets may not be correctly positioned. Check that the baskets are correctly positioned horizontally.

Gorenje GV672C61 Specifications

General IconGeneral
Product sizeFull size (60 cm)
Control panel colourBlack
Built-in displayYes
Inlet hose length1.5 m
Outlet hose length1.5 m
Capacity16 place settings
Noise emission classB
Noise level42 dB
Number of washing programs7
Delayed start timerYes
AquaStop functionYes
Energy efficiency classC
Width598 mm
Drying Efficiency ClassA
Delay StartYes
Half Load OptionYes
ProgramsEco, Intensive, Glass, Quick
Depth55 cm
Appliance placementFully built-in

Related product manuals