What does error F67 mean on Gorenje GV672C60?
If your Gorenje Dishwasher displays error code F67, it indicates a water inlet fault. Ensure that the water tap is turned on and check the outer filter on the inlet hose for any blockages.
How to fix Gorenje Dishwasher when the dishes are not clean?
If the dishes in your Gorenje Dishwasher aren't getting clean, start by checking the spray arms to ensure they rotate freely and aren't blocked by dishes. Remove the spray arms and clean them, paying special attention to any blocked holes or bearings. Select a more intensive program for greasy dishes. Ensure you're using the correct detergent dosage based on your water hardness, and check that your detergent isn't old, as detergents can expire.
What to do if water remains in Gorenje GV672C60 Dishwasher?
If water remains in your Gorenje Dishwasher, the filters may be blocked or incorrectly fitted. Clean the coarse and fine filters, and ensure the filter handle is locked. Check for debris in the drainage pump and ensure the colored stop is in place. Inspect the drainage hose for kinks or blockages, ensuring the connection to the sink unit's water trap is clear and has a diameter of at least 14 mm.
How to remove spots or films on the dishes from Gorenje GV672C60?
If your Gorenje Dishwasher leaves spots or films on the dishes, the water softener might be leaking salt; ensure the salt compartment lid is properly tightened. Check and adjust the water softener and rinse aid settings as needed. Make sure the salt compartment is full. If you're using 3-in-1 detergent with the TAB setting activated, try inactivating the TAB setting and adding salt and rinse aid separately. For crystal, use lower temperatures and less detergent to prevent etching.
How to prevent spots on stainless steel or silver in Gorenje GV672C60?
If you're finding spots on stainless steel or silver in your Gorenje Dishwasher, it might be due to certain foods like mustard, mayonnaise, lemon, vinegar, salt, or dressings left on the dishes for too long. Rinse these off before loading. Also, separate silver, stainless steel, and aluminum dishes to prevent contact during washing. Consider using the One hour program with the SpeedWash option.
How to remove grease deposits in Gorenje GV672C60?
If you notice grease deposits in your Gorenje Dishwasher, select a program with a high temperature to dissolve grease on very dirty dishes, such as Intensive wash. Alternatively, run a self-cleaning program.
How to fix error F10 on Gorenje Dishwasher?
If your Gorenje Dishwasher displays error code F10, it indicates overfilling. Clear the drainage pump.
What does F12 error mean on Gorenje GV672C60 Dishwasher?
If your Gorenje Dishwasher displays error code F12, it indicates a water inlet fault. Ensure that the water tap is turned on. Also, check the outer filter on the inlet hose for any blockages.
How to get rid of bad odor in Gorenje GV672C60?
If you notice a bad odor in your Gorenje Dishwasher, it could be due to dirt around the seals and in corners. Clean these areas with a washing-up brush and a low-foaming cleaner. If you frequently use low-temperature programs, run a higher temperature program about once a month or use the self-cleaning program.
Why the buttons do not react when pressed on Gorenje GV672C60 Dishwasher?
If the buttons on your Gorenje Dishwasher aren't responding, wait a moment before trying again after opening the door. Ensure the buttons are clean and free of dirt by wiping them with a dry or slightly damp cloth. Remember that the buttons only work when the door is open. Also, check that the baskets are correctly positioned horizontally and that dishes aren't blocking them from sliding into place.
General| Brand | Gorenje |
|---|---|
| Model | GV672C60 |
| Category | Dishwasher |
| Language | English |
How and where to add detergent for optimal cleaning.
Guide to choosing the right wash program for different needs.
Adjusting the water softener based on local water hardness.
How to clean the coarse and fine filters for optimal performance.
Diagnosing and resolving common error codes displayed on the machine.
Identifying and fixing reasons why the dishwasher won't start.
Common causes and solutions for dishes not being cleaned properly.
Solutions for water not draining from the dishwasher.
Tips and settings to improve drying performance.
Key dimensions and safety precautions for installing the appliance.
Guidelines for safely connecting the dishwasher to the electrical supply.
Information on how to contact customer service for repairs and spare parts.
To Next Page
