How to remove sticky white or blue film from dishes in Gorenje Dishwasher?
If your Gorenje Dishwasher leaves a sticky white/blue film on the dishes, the rinse aid dosage might be too high. Reduce the amount. For very soft water, consider diluting the rinse aid 50:50 with water.
How to remove grease deposits in Gorenje GV672C60?
If you notice grease deposits in your Gorenje Dishwasher, select a program with a high temperature to dissolve grease on very dirty dishes, such as Intensive wash. Alternatively, run a self-cleaning program.
How to prevent spots on stainless steel or silver in Gorenje GV672C60?
If you're finding spots on stainless steel or silver in your Gorenje Dishwasher, it might be due to certain foods like mustard, mayonnaise, lemon, vinegar, salt, or dressings left on the dishes for too long. Rinse these off before loading. Also, separate silver, stainless steel, and aluminum dishes to prevent contact during washing. Consider using the One hour program with the SpeedWash option.
How to remove spots or films on the dishes from Gorenje GV672C60?
If your Gorenje Dishwasher leaves spots or films on the dishes, the water softener might be leaking salt; ensure the salt compartment lid is properly tightened. Check and adjust the water softener and rinse aid settings as needed. Make sure the salt compartment is full. If you're using 3-in-1 detergent with the TAB setting activated, try inactivating the TAB setting and adding salt and rinse aid separately. For crystal, use lower temperatures and less detergent to prevent etching.
What to do if water remains in Gorenje GV672C60 Dishwasher?
If water remains in your Gorenje Dishwasher, the filters may be blocked or incorrectly fitted. Clean the coarse and fine filters, and ensure the filter handle is locked. Check for debris in the drainage pump and ensure the colored stop is in place. Inspect the drainage hose for kinks or blockages, ensuring the connection to the sink unit's water trap is clear and has a diameter of at least 14 mm.
Why my Gorenje GV672C60 Dishwasher does not start?
If your Gorenje Dishwasher isn't starting, several factors could be at play. Make sure the door is fully closed. If you paused a running program to add dishes, simply close the door and wait for the cycle to resume. Check that the door lock clicks into place; if not, try resetting the Auto open feature by pressing and holding its button until it flashes, waiting until it stops, then closing the door again. Also, verify that a fuse or circuit breaker hasn't tripped, the dishwasher is properly plugged in, and the water tap is turned on. Finally, check for any overflow or leaks, and ensure the Delayed start option isn't enabled.
What does error code F40 mean on Gorenje GV672C60 Dishwasher?
General| Brand | Gorenje |
|---|---|
| Model | GV672C60 |
| Category | Dishwasher |
| Language | English |
How and where to add detergent for optimal cleaning.
Guide to choosing the right wash program for different needs.
Adjusting the water softener based on local water hardness.
How to clean the coarse and fine filters for optimal performance.
Diagnosing and resolving common error codes displayed on the machine.
Identifying and fixing reasons why the dishwasher won't start.
Common causes and solutions for dishes not being cleaned properly.
Solutions for water not draining from the dishwasher.
Tips and settings to improve drying performance.
Key dimensions and safety precautions for installing the appliance.
Guidelines for safely connecting the dishwasher to the electrical supply.
Information on how to contact customer service for repairs and spare parts.
To Next Page
