Gorenje GVSP164J - User Manual

Questions and Answers

T
Trevor MatthewsAug 20, 2025
What to do if my Gorenje GVSP164J does not start?
- G
  Gerald WilliamsAug 20, 2025
  If your dishwasher isn't starting, several things could be the cause. First, ensure the door is properly closed and the door lock has clicked into place. If it hasn't, open the door, press and hold the Auto open button for 15 seconds, wait 30 seconds, and then close the door again. Check if a fuse or circuit breaker has been tripped, or if the plug is properly plugged into the wall socket. Also, verify that the water tap is turned on and that the Delayed start option hasn't been selected. If it has, press and hold the main power switch until the display turns off to cancel it, then restart the dishwasher.
R
Robert JenkinsAug 22, 2025
Why is there detergent residue in the detergent compartment of my Gorenje Dishwasher after washing?
- P
  Paul SanchezAug 22, 2025
  If you find detergent residue in the compartment after washing, it's likely because the detergent compartment was damp when you added the detergent. Ensure the detergent compartment is dry before adding detergent.
C
Christina WrightAug 25, 2025
Why are the dishes not clean in my Gorenje Dishwasher?
- C
  Claudia HendersonAug 25, 2025
  If your dishes aren't coming out clean, several factors could be at play. The spray arms might not be rotating because they are blocked, so remove and clean them. Also, make sure you're using a suitable dishwashing program—a longer program may be necessary. Incorrect detergent dosage or old detergent could also be the cause. Ensure you dose correctly according to water hardness and avoid using large packages of detergent, as it's a perishable product. Check that dishes are loaded correctly, without covering porcelain or placing tall glasses in corners, and that the filters are correctly fitted and the drainage pump stop is in place.
L
Lisa DavisAug 26, 2025
How to remove spots or films on dishes from Gorenje GVSP164J Dishwasher?
- D
  dylanjacksonAug 26, 2025
  Spots or films on dishes can occur for several reasons. The water softener might be leaking salt, so check that the salt compartment lid is properly tightened. Ensure you have the correct water softener and rinse aid dosage settings. If the salt compartment is empty, top it up with salt. If you're using 3-in-1/ All-in-one detergent and the TAB setting is activated, try inactivating the TAB setting and topping up salt and rinse aid. High temperatures and too much detergent can also cause etching on crystal, so wash crystal at a low temperature with a conservative amount of detergent.
S
sharpkristaAug 28, 2025
Why are my dishes not dry enough after using the Gorenje GVSP164J?
- W
  wrightbenjaminAug 28, 2025
  If your dishes aren't drying properly, ensure that the Auto open option is activated. A dishwasher that isn't fully loaded might also cause this issue, so try to fully load it. Check if the rinse aid needs topping up or if the dosage is set too low, and adjust accordingly. If you're using 3-in-1/ All-in-one detergent and the TAB setting is activated, try inactivating the setting and topping up salt and rinse aid.
A
Alexandra MartinAug 30, 2025
How to get rid of bad odour in Gorenje GVSP164J?
- R
  Ryan BryantAug 30, 2025
  A bad odor in the dishwasher can result from dirt around the seals and in corners, so clean these areas with a washing-up brush and low foaming cleaner. Also, running low temperature programs for a prolonged period can contribute to the odor. Try running a program with a higher temperature about once a month.
A
ajacksonSep 1, 2025
How to prevent spots on stainless steel or silver in Gorenje Dishwasher?
- L
  Laura VasquezSep 1, 2025
  Spots on stainless steel can be caused by some foodstuffs, such as mustard, mayonnaise, lemon, vinegar, salt, and dressings, if left for too long. Rinse off these types of foodstuffs if you're not starting the dishwasher immediately, or use the Rinse program. To avoid marks and tarnishing, separate dishes made from different metals, such as silver, stainless steel, and aluminium.
B
Bryan AdamsSep 3, 2025
What to do if I cannot close the door of my Gorenje Dishwasher?
- E
  Eric WoodSep 3, 2025
  If you cannot close the dishwasher door, first check that the baskets are correctly positioned horizontally. If the door lock does not click into place and lock, open the door, press and hold the button for the Auto open option for 15 seconds, wait 30 seconds, and then close the door again to see if the door lock clicks into place.
M
Marissa RussoSep 5, 2025
Why is there a rattling sound when my Gorenje GVSP164J is running?
- T
  Troy JamesSep 5, 2025
  A rattling sound during dishwashing usually means that the dishes are not correctly placed or the spray arms are not rotating. Check that the dishes are placed securely. Spin the spray arms to make sure they can rotate freely.
R
Rachel CastilloSep 7, 2025
What to do if the buttons on my Gorenje GVSP164J do not react?
- C
  Charles SalinasSep 7, 2025
  If the buttons on your dishwasher aren't responding, it could be due to a few reasons. If you've just opened the door, wait a moment before pressing the buttons again. The buttons might also be dirty, so clean them with a dry or slightly damp cloth. Also, make sure the door is open, as the buttons only react when the door is open.