Why Gorenje GVSP165JUK Dishwasher buttons do not react when pressed?
If the buttons on your Gorenje Dishwasher aren't responding, it could be because you pressed them too soon after opening the door; wait a moment and try again. The buttons might be dirty, so clean them with a dry or slightly damp cloth. Also, the buttons only work when the door is open, so ensure the door is open while pressing them.
What does F56 error on Gorenje Dishwasher mean?
If your Gorenje Dishwasher shows error code F56, this indicates a circulation fault. Contact the service department.
What to do if Gorenje GVSP165JUK Dishwasher shows F54 error?
If your Gorenje Dishwasher shows error code F54, this indicates overfilling. Turn off the water tap and call the service department.
What does error F40 mean on Gorenje GVSP165JUK?
If your Gorenje Dishwasher shows error code F40, this indicates an inlet valve leakage. Turn off the water tap and call the service department.
What to do for Gorenje GVSP165JUK error F52?
If the Gorenje Dishwasher displays error code F52, it indicates a water level fault. You should clean the coarse and fine filters and check that the outer filter on the inlet hose is not blocked. If the problem persists, contact the service department.
What does F12 error mean on Gorenje GVSP165JUK Dishwasher?
If the Gorenje Dishwasher displays error code F12, it indicates a water inlet fault. Check that the water tap is turned on and that the outer filter on the inlet hose is not blocked. If the problem persists, contact the service department.
How to fix F10 error on Gorenje Dishwasher?
If the Gorenje Dishwasher displays error code F10, it indicates overfilling. You should clear the drainage pump. If the problem continues, contact the service department.
Why does my Gorenje GVSP165JUK make a rattling sound?
If your Gorenje Dishwasher is making a rattling sound, ensure the dishes are placed securely. Spin the spray arms to confirm they can rotate freely without obstruction.
What to do if I cannot close Gorenje GVSP165JUK Dishwasher door?
If you're unable to close the door of your Gorenje Dishwasher, check that the baskets are correctly positioned horizontally. If the door lock isn't clicking into place, open the door, press and hold the button for the Auto open option for 15 seconds, wait 30 seconds, then close the door again to see if the lock engages.
Why my Gorenje GVSP165JUK Dishwasher does not start?
If your Gorenje Dishwasher isn't starting, several factors could be at play. Make sure the door is completely closed and latched. If you opened the dishwasher mid-cycle, close the door and wait for the program to resume. Also, verify that a fuse or circuit breaker hasn't tripped, the dishwasher is plugged in, and the water tap is on. Check for any overflows or leaks. If you hear a continuous whirring sound from the drainage pump, turn off the water tap, unplug the dishwasher, and contact service. Finally, ensure the Delayed start option isn't active; cancel it by pressing and holding the main power switch until the display turns off, then restart the dishwasher.
General| Control panel colour | Black |
|---|---|
| Drying system | Condensation drying |
| Energy efficiency class | C |
| Width | 598 mm |
| Delay start | Yes |
| Display | Yes |
| Half Load Option | Yes |
| Appliance placement | Built-in |
| Product size | Full-size |
| Number of place settings | 16 |
| Depth | 550 mm |
| Water supply | Cold, Hot |
| Capacity | 16 place settings |
| Number of Programs | 6 |
| Water consumption | 9.5 L |
To Next Page
