Why is there ice build up in my Gorenje NRC620CSXL4WF Refrigerator freezer?
If you observe excessive ice build-up in the freezer interior of your Gorenje Refrigerator, it might be because the door has been opened too frequently or for too long, or the door is not properly closed, or the door has a poor seal (if the gasket is dirty, the door is not properly aligned, or the gasket is damaged). You can manually defrost the appliance.
What to do if water is dripping from my Gorenje NRC620CSXL4WF?
If water is dripping or leaking from your Gorenje Refrigerator, it could be due to a clogged water discharge opening or water dripping past the water gutter. Try cleaning the blocked opening, for example, by using a plastic straw. If a thick layer of ice builds up, defrost the appliance manually.
What does E9 mean on my Gorenje Refrigerator?
If you see 'E9' on the display unit of your Gorenje Refrigerator, it means the door was open for too long. Close the door. If the lighting in the compartment does not function, then there is a door sensor fault. Call a service centre to arrange a repair. The appliance will operate in safe mode until it is repaired, automatically preserving the most suitable temperature for each compartment.
What does E4 mean on my Gorenje Refrigerator display?
If 'E4' appears on the display unit of your Gorenje Refrigerator, it indicates a compartment fan failure. Call a service centre for repair. Because the appliance cannot operate normally, transfer the food to a cool place and switch off the appliance.
What does E5 mean on my Gorenje Refrigerator?
If 'E5' appears on the display unit of your Gorenje Refrigerator, this indicates a condenser compartment fan failure. Call a service centre for repair. Because the appliance cannot operate normally, transfer the food to a cool place and switch off the appliance.
Why is my Gorenje NRC620CSXL4WF cooling system running constantly?
If the cooling system of your Gorenje Refrigerator operates continuously for a long period, it could be due to several reasons: the environment temperature is too high, the door was opened too frequently or for too long, the door is not closed correctly (possibly due to impurities on the seal, a misaligned door, or a damaged seal), or too much fresh food was inserted at once.
What does error code E1 or E2 mean on a Gorenje NRC620CSXL4WF?
If 'E1' or 'E2' appears on the display unit of your Gorenje Refrigerator, it indicates a temperature sensor error or fault. Call a service centre for repair. Until the appliance is repaired, it will operate in safe mode, automatically preserving the most suitable temperature for each compartment.
What does error code E3 mean on a Gorenje NRC620CSXL4WF Refrigerator?
If 'E3' appears on the display unit of your Gorenje Refrigerator, it means there is a Wi-Fi module failure. Call a service centre for repair. Until a service technician repairs the appliance, it will operate normally as a non-connectible appliance.
What does PF mean on my Gorenje NRC620CSXL4WF Refrigerator?
If 'PF' appears on the display unit of your Gorenje Refrigerator, it indicates an extended power failure.
General| Brand | Gorenje |
|---|---|
| Model | NRC620CSXL4WF |
| Category | Refrigerator |
| Language | English |
To Next Page