What to do if my Gorenje ZOS3161 is not working after connecting to power?
If your Gorenje Freezer isn't working after connecting it to the power, ensure that the wall outlet is powered and that the appliance is properly plugged in.
How to replace the bulb in my Gorenje ZOS3161?
Before replacing the light bulb in your Gorenje freezer, disconnect it from the power supply. Remove the plastic cover, replace the bulb with a new one (E 14, max. same voltage as the factory one), and refit the cover.
Why is there ice accumulation in my Gorenje ZOS3161 Freezer?
Ice accumulation in your Gorenje Freezer can result from poor door sealing (clean or replace the seal if it's dirty or damaged), opening the door too often or leaving it open too long, or placing warm food inside.
How to replace the light bulb in Gorenje Freezer?
To replace the bulb in your Gorenje Freezer (certain models only), first disconnect the appliance from the power supply. Then, remove the plastic cover, replace the old bulb with a new one (E 14, max. same voltage as the factory one), and reattach the cover.
What to do if Gorenje ZOS3161 door won't open easily?
If you experience strong resistance when trying to open the Gorenje freezer door immediately or shortly after closing it, this is normal. When the door opens, cool air escapes and is replaced by warm air, creating a sub-pressure as it cools. This resistance will normalize after a few minutes, allowing the door to open easily.
Why is my Gorenje ZOS3161 Freezer cooling system running constantly?
Your Gorenje Freezer's cooling system might run continuously due to several factors: * Too high environment temperature. * The door being opened too often or left open too long. * Improper door closure, possibly due to dirt, tilting, or seal issues. * Inserting too much fresh food at once. * Insufficient compressor and condenser cooling. Check air circulation and clean the condenser.
What does it mean if D light is flashing on my Gorenje Freezer?
A flashing 'D' light on your Gorenje freezer indicates: * Frequent opening of the door or leaving it open too long. * The door not closing properly due to a particle in the door gasket, a sagged door, or a damaged gasket. * An excessively long power failure. * Inserting an excessive quantity of fresh food at once.
What does a flashing signal light B on Gorenje ZOS3161 Freezer mean?
If the signal light B is flashing on your Gorenje freezer, call a service technician.
Why does my Gorenje ZOS3161 make a murmur after closing the door?
After closing the door of your Gorenje Freezer, some murmur can occur. This phenomenon is normal and is due to pressure equalization.
Why won't the Gorenje ZOS3161 door open easily?
If you experience strong resistance when trying to open the Gorenje Freezer door immediately or shortly after closing it, this is normal. When the freezer door opens, cool air escapes and is replaced by warm air, creating a sub-pressure as it cools. This resistance will normalize after a few minutes, allowing the door to open easily.
Safety and setup guidelines before the first operation of the appliance.
Precautions for safe use by children and individuals with reduced capabilities.
Information about the flammable refrigerant and associated safety measures.
Guidelines on the proper applications and household use of the appliance.
Procedures for environmentally responsible removal and disposal of old appliances.
Criteria for choosing a suitable environment for appliance installation.
Physical setup procedures, including leveling and placement.
How to safely connect the appliance to the mains electrical outlet.
Overview of control units I and II, including their indicators and functions.
Instructions for switching the appliance on/off and setting the temperature.
Explanation of the power boost and high temperature alarm features.
Overview of control units III and IV, including their indicators and functions.
Different methods for turning the appliance on and off.
Adjusting temperature for optimal cooling and environmental factors.
Steps for correctly freezing fresh food items.
Important advice on packaging and quality for freezing.
Tips to avoid contamination and proper storage of frozen food.
Recommended duration for storing various types of frozen foods.
Manual defrosting process for traditional freezer models.
Information on the automatic defrosting of No Frost models.
Safety and setup guidelines before the first operation of the appliance.
Precautions for safe use by children and individuals with reduced capabilities.
Information about the flammable refrigerant and associated safety measures.
Guidelines on the proper applications and household use of the appliance.
Procedures for environmentally responsible removal and disposal of old appliances.
Criteria for choosing a suitable environment for appliance installation.
Physical setup procedures, including leveling and placement.
How to safely connect the appliance to the mains electrical outlet.
Overview of control units I and II, including their indicators and functions.
Instructions for switching the appliance on/off and setting the temperature.
Explanation of the power boost and high temperature alarm features.
Overview of control units III and IV, including their indicators and functions.
Different methods for turning the appliance on and off.
Adjusting temperature for optimal cooling and environmental factors.
Steps for correctly freezing fresh food items.
Important advice on packaging and quality for freezing.
Tips to avoid contamination and proper storage of frozen food.
Recommended duration for storing various types of frozen foods.
Manual defrosting process for traditional freezer models.
Information on the automatic defrosting of No Frost models.
General| Appliance placement | Freestanding |
|---|---|
| Freezing capacity | 18 kg/24h |
| Climate class | SN, N, ST, T |
| Noise level | 42 dB |
| Energy efficiency class | A+ |
| Weight | 38 kg |
| Defrost System | Manual |
| Star rating | 4-star |
To Next Page
