Setting the Alarm Sensitivity
Your alarm is manufactured with the sensitivity feature pre-set at the factory.
If you wish to adjust the sensitivity, using the remote transmitter, you can select
from 7 levels of sensitivity as well as de-activating the shock sensor.
1. Within 5 seconds of disarming alarm, press and hold button for
3 seconds (you will hear a click).
2. Press button to scroll through the seven (7) levels of sensitivity.
The higher the pitch of tone, the more sensitive the alarm is to shock
(the chirp sound de-activates the shock sensor). At each level you can
test the shock sensitivity by tapping the handlebars or a different part
of the motorcycle.
3. Press and hold the button when you have selected the proper level.
(You will hear 2 beeps).
NOTE: To avoid false alarms, do not set the unit to be overly sensitive.
Selecting the Siren Tones
Your alarm has been pre-set at the factory with the multi 5-tone alarm siren.
If you should wish to change the siren tone from the multi 5-tone siren to one
single tone, follow the directions below.
1. Within 5 seconds of disarming your alarm press and hold button for
3 seconds. (You will hear a click).
2. Press button to scroll through the multi siren tones.
3. Press and hold the button when you have selected the siren tone
you wish to save. (You will hear 2 beeps).
Ordering Additional Remote Transmitters
To order additional replacement, send $16.50
(includes shipping and handling) to:
Also by using your VISA or MasterCard, call (800) 262-6267.
m
v
11
Part # 8007-3B
Gorilla Automotive Products
2011 E. 49th Street
Los Angeles, CA 90058
(323) 585-2852
To Next Page
Loading...