Gossen MetraWatt SECUTEST SII - User Manual

48 pages

To Next Page

To Next Page

Loading...

Operating Instructions

SECUTEST

®

SII

Test Instrument for DIN VDE 0701, 0702 and 0751

3-349-223-03

8/11.05

Table of Contents

Default Chapter4
- Table of Contents4
1 Applications6
- Table: Types of Duts – Tests – Regulations6
- Table: Individual Measurements and Regulations6
- List of Possible Options for SECUTEST7
  - SII Device Series7
- Table: Leakage Current Types7
2 Safety Features and Precautions8
3 Initial Start-Up9
- Connection to the Mains (230 V, 50 Hz)9
- Automatic Recognition of Mains Connection Errors10
4 General Notes10
- Online Instructions10
- Automatic Safety Class Selection10
- Manual or Automatic Operating Sequences10
- Online Help10
- Adjusting Contrast11
- Configuring Device Parameters, Setting Date and Time11
- Configuring Measurement and Sequence Parameters11
- Setting Limit Values11
- Saving the Settings11
5 Classification of Devices under Test12
- Safety Classes12
- Application Parts (Electrical Medical Devices)12
6 Abbreviations13
7 Connecting the Device under Test14
8 Configuring Device Parameters15
9 Individual Measurements16
- Measuring Protective Conductor Resistance16
- Insulation Resistance RISO17
- Measuring Leakage Current19
- Contact Current I19
- Residual Current ΔI19
- (Probe Current, Housing Leakage Current)19
- Device Leakage Current IDL Per DIN VDE 075119
- Equivalent Leakage Current20
- Probe Voltage U Probe - Max. 300 V21
- Alternating / Direct Voltage UAC/DC - Max. 253 V (Feature F01)22
- Resistance R (Feature F01)22
- Measurements with Accessories (Feature F01)22
- Alternating Current I with Clip-On Transformer (Feature F01)22
- Temperature T with Pt100/1000 Sensor (Feature F01)23
10 Function Test24
11 Measurements - Selector Switch Settings for Standards26
- Test Sequences26
- Setting up Test Sequences27
- Configuring Measuring Parameters27
- Testing Devices in Accordance with DIN VDE 0701, Parts 1 and 20028
- Testing Devices in Accordance with DIN VDE 0701, Part 24030
- Testing Devices in Accordance with DIN VDE 0702:200432
- Testing Extension Cables for VDE 0701, Part 1, and VDE 0702 (Option: EL1 Adapter)34
- Testing Multiple Outlets for VDE 0702 (Optional EL1 Adapter)35
- Testing in Accordance with DIN VDE 075136
12 Storage in PSI Module (Feature E01) and Database Operations (Feature KB01 or Dbmed Option)38
- Storing Measurement Data in the PSI Module38
- Database Operations38
- Setting up Test Sequences with PC Software38
- Storing Test Results to the SECUTEST SII38
13 Remote Control (Feature KD01 or SK5 Option)38
14 Printing Via PSI Module (Feature E01) or with the Printer Adapter (DA-II Accessory)39
- Print out Test Data at the PSI Module39
- Printing Test Results in Report Form39
15 Direct Print-Out (Feature KE01, SECU-DD Option)39
16 Characteristic Values40
17 RS 232 Interface43
- Transmission of Measurement Results to the SECUTEST ® PSI43
- PC Connection43
- Software Evaluation of Measurement Results43
- Instrument Control Via Interface Commands43
- Interface Configuration and Protocol43
18 Appendix44
- Evaluation of Measured Values for Individual Measurements as Well as for Calculated Quantities44
- Index45
19 Maintenance - Calibration46
20 Repair and Replacement Parts Service46
- DKD Calibration Laboratory and Rental Instrument Service46
21 Product Support47

Need help?

Do you have a question about the Gossen MetraWatt SECUTEST SII and is the answer not in the manual?

Gossen MetraWatt SECUTEST SII Specifications

General

RCD Testing	Yes
Insulation Resistance Measurement	Yes
Display	LCD
Type	Electrical Safety Tester
Measurement Functions	Insulation resistance, RCD testing
Test Current	1 mA, 10 mA

Summary

Initial Start-Up

Connection to the Mains

Connects the test instrument to the mains power outlet for operation.

Automatic Recognition of Mains Connection Errors

General Notes

Connecting the Device Under Test

Connecting the DUT

Guides on connecting devices via plugs, jacks, or adapters based on type and safety class.

Configuring Device Parameters

Individual Measurements

Measuring Protective Conductor Resistance

Details the measurement of resistance in protective conductor circuits for safety.

Insulation Resistance Riso

Explains how to measure insulation resistance between mains terminals and protective conductor.

Measuring Leakage Current

Covers different types of leakage current tests (contact, residual, device) for safety compliance.

Equivalent Leakage Current

Describes measurement of equivalent leakage current as per VDE standards.

Function Test

Performing the Function Test

Guides on executing a functional test with line voltage after safety tests.

Measurements - Selector Switch Settings for Standards

Test Sequences

Testing Devices in Accordance with DIN VDE 0701, Parts 1 and 200

Testing Extension Cables for VDE 0701, Part 1, and VDE 0702

Storage in PSI Module and Database Operations

Characteristic Values