GOSSEN METRAWATT GMBH 47
Competent Partner
GOSSEN METRAWATT GMBH is certified in accordance with
DIN EN ISO 9001:2000.
Our DKD calibration lab is accredited by the Physikalisch-Technischen
Bundesanstalt (German Federal Institute of Physics and Metrology) and
the Deutscher Kalibrierdienst (German Calibration Service) in accordance
with DIN EN ISO/IEC 17025 under registration number DKD–K–19701.
We offer a complete range of expertise in the field of metrology: from test
reports and factory calibration certificates, right on up to DKD calibration
certificates. Our spectrum of offerings is rounded out with free test equip-
ment management.
Our service department includes an
on-site DKD calibration bench
. If errors
are discovered during calibration, our specialized personnel are capable of
completing repairs using original replacement parts. As a full service cali-
bration lab, we can calibrate instruments from other manufacturers as well.
21 Product Support
If required please contact:
GOSSEN METRAWATT GMBHProduct Support Hotline
Phone: +49-(0)-911-8602-112
Fax: +49-(0)-911-8602-709
E-mail support@gossenmetrawatt.com
To Next Page
Loading...