23
Power on/off: Press and hold the button for 2 seconds, the display lights up and
power on. Press and hold the ‘ button for 2 seconds when powered on, the display
screen goes out, and the power is turned off. It will automatically shut down after 10
minutes without operation.
Function Definition
Gears Switching : 0-5 gears in total. Default gear is 0 after switching on, and 0 is
neutral, no power output. Short press the button or button to adjust the gear
up or down. (Power assist mode: 1-5 gears with gear distinction, electric mode: 1-5
gears without gear distinction).
Speed switching: After power on, the display shows the real-time speed by default.
Short Press the button to switch the display information as follows: SPEED (real
-time speed) → AVG (average speed of this ride) → MAX (maximum speed of this ride).
TRIP and ODO Switching: Short press the button to switch the mileage information,
which is displayed as follows: TRIP A (single mileage A)→TRIP B(single mileage B)→ODO
(Odometer).
Light control: Press and hold the button for 2 seconds to turn on the front and
rear lights when powered on. The front and rear lights remain bright and the light
icon lights up. When the lights are on, the rear brake light will be brighter than
general status. Press and hold the button again for 2 seconds to turn off the
lights, and the light icon goes out.
To Next Page
Loading...
Need help?
General