To Next Page

To Previous Page

Troubleshooting Guidance

Troubleshooting tips

ERROR 22 The accelerator failure

The motor troubleshooting

The Brake faulire

ERROR 23

ERROR 24

ERROR 25

ERROR 30

Code meaning Troubleshooting clearing

Check the accelerator connection

cable. If the connection cable is

normal, replace the accelerator

Check the motor connection

cable. If the connection cable is

normal, replace the motor

Check the motor connection

cable. If the connection cable is

normal, replace the motor

Check the brake connection cable,

if the connection line is normal,

replace the brake handle.

Check the display connection

cable. If the connection cable is

normal, replace the display

Display communication

failure

When the E-bike electric control system fails, the display will show the error codes,

and only when the fault is removed can you exit the fault display program.

After the fault occurs, the E-bikes will not continue working.

Gotrax F2 User Manual

Questions and Answers: