TIP: To activate the STEERING
lock
First, set the key to Neutral mode. Then turn the
handlebars to the right as far as they will go. Now
turn the key to the left until you reach the locked
position. Take the key out. Done. The handlebar
lock is activated.
ignition On and OFF
You go
Starting your Schwalbe is actually quite simple: Insert
the key, switch the ignition on, operate one of the two
brake handles together with the UP or DOWN switches
and you are done. Your Schwalbe is now ready to drive.
You'LL QUICKLY
get the hang
of it: The starT
process
06
To Next Page
Loading...
