Start Here
Unpack Your DV2140
• DVD+VCR
• Remote control
• 1.5V AAA batteries (2)
• RF (Radio Frequency) Antenna cable
• RCA cable for Audio/Video connections
• User’s guide
• Read Me First/Quick Reference Guide
• Warranty registration card
Insert Batteries
1 Remove battery cover.
2 Insert two 1.5V AAA batteries, paying
attention to the correct polarities (+/–).
3 Replace cover.
• CD-ROM, CD+G, and CD-i discs cannot be
played on this DVD player.
Q uestions?
O ur Aw ard-W inning Customer
Service Professionals are
Ready to Help!
O r Check O ur
Website!
www.govideo.com
Call U s!
1-800-736-7679
E -M ail Us!
customerservice@govideo.com
DO N O T R E TU RN TH IS
PR O DUCT TO TH E STO R E !
T
han
k
You
!
For Fast, Friendly
Service
For a Prompt R e ply
For the Latest FAQ s
STOP
DVD+VCR
Television
RCA Audio/Video
Cable
RF Antenna
Cable
:: Basic Connections
To get started, you will need to connect the DVD+VCR to your TV. The DVD+VCR
clock will be set automatically.
1 Connect Antenna to DVD+VCR Connect an indoor/outdoor antenna or
wall outlet antenna cable to the ANT. IN jack on the rear panel.
2 Connect DVD+VCR to TV Choose one of the following methods:
a. RF Connection Using the supplied RF antenna cable, connect the RF OUT
jack on the back panel of the DVD+VCR to your TV’s Antenna Input.
b. Line Connection Using the supplied RCA-type audio/video cable (red,
white, yellow), connect the DVD/VCR OUT jacks on the back panel of your
DVD+VCR to your TV's Audio/Video In jacks. If your TV is equipped with RCA
jacks, it is better to use the Line Connection method.
3 Plug In Plug the DVD+VCR power cable into a standard 120V/60Hz wall
outlet.
4 Turn On Your DVD+VCR Press the POWER button on the remote control
or front panel of the unit.
5 Turn On Your TV Press the POWER button on your TV.
6 Set the TV to Channel 3 or Line The factory default is channel 3. See
the User's Guide to change the RF Output to channel 4. If you are using the Line
Connection method, set your TV to its Line or Video input.
• You must use either the Standard RF or Line connection between your TV
and DVD+VCR, even if you plan to use the S-Video or Component Video
Output for improved DVD picture quality.
• The S-Video and Component Video Outputs are for DVD playback only!
• See the User's Guide for advanced connections.
Antenna/Cable TV
A/V IN
ANT IN
POWER
DV2140
AV2 IN
CH
PAUSEPLAYREW STOPFF DVD/VCR
VIDEO
COPY REC
DVD EJECT VCR EJECT
L - AUDIO - R
To Next Page
Need help?
General
