Need help?Do you have a question about the GPAD Joyride and is the answer not in the manual?
Use a damp soft cloth for cleaning. Avoid alcohol, solvents, and pressure washers.
Inflate tires to 3 bar (40psi). Check regularly. Stop riding if tire is damaged.
Release screws A, turn screw B clockwise, then retighten screws A.
Tighten hex screw counterclockwise to secure handlebar. Adjust as needed.
Store scooter off, battery at 50-60%, in a dry room at 15-25°C.
To Next Page
General
