13
6.14.2 The default mode is “track” (Track mode).
6.14.3 Send SMS “monitor+password” to the unit, and it will reply“monitor
ok!” and switch to “monitor” mode.
6.14.4 Send SMS “tracker+password” to the unit, it will reply “tracker ok!” and
restore to “track” mode.
6.15.Data logging
6.15.1 When the tracker device loses GSM signals or fall offline from GPRS, tracker will
store the tracking position and alerts automatically upon the pre-set condition, when GSM
signals get back, all the event alerts will be auto-sent to the authorized numbers or monitoring
platform (server), but the stored tracking data should be loaded to the monitoring platform via
SMS command.
6.15.2: Storage upon times: Send SMS: “save030s005n+password” to the tracker unit, it will
reply “save ok”, and store the lat, long locations every 30 seconds for 5 times. (S: second, m:
minute; h: hour).
6.15.3 Unlimited storage：Send sms:”save030s***n+ password” to tracker device, it will
reply “save ok”.
6.15.4: Storage Clearance: Send SMS: “clear+ password” to tracker device, it will reply
“clear ok”.
6.15.5：Storage Volume: It depends on the capacity of the SD card inserted in the
tracker device.
6.15.6: The stored data in SD card can be copied to computers through card
reader, and then the data route can be checked by importing data in the menu
“Data Import” of web platform www.gpstrackerxy.com
To Next Page
Loading...
Need help?
General
