What to do if my GPS Tracker 403 GPS has no alarm notification message?
If your GPS Tracker is not sending alarm notifications, ensure that you have set up an authorized number and that the phone number format is correct.
What to do if my GPS Tracker 403 has no response for a call?
If your GPS Tracker does not respond to calls, verify that you have set up an authorized phone number and that you are calling from an authorized phone number.
How to troubleshoot a GPS Tracker 403 that fails to stop the engine?
If the engine fails to stop, verify that the engine stop wiring is correctly connected. Also, when using the delay execution method, ensure that the speed is not higher than the speed at which the stop command is set to execute.
What to do if my GPS Tracker 403 GPS has no GSM signal?
If your GPS Tracker doesn't have a GSM signal, make sure the SIM card is correctly inserted, is a GSM network SIM card, does not have a PIN code enabled, and call forwarding is disabled.
Why does my GPS Tracker 403 have no response for SMS command?
If your GPS Tracker is not responding to SMS commands, it could be due to the SIM card having no credit or the SMS command format being incorrect.
How to fix a GPS Tracker 403 when the remote control cannot be used?
If the remote control cannot be used, turn off the GPS Tracker and turn it back on to program the remote control again.
What to do if my GPS Tracker GPS has no GPS signal?
If your GPS Tracker GPS has no GPS signal, ensure that the device is in an unobstructed position so it can receive GPS signals normally.
How to fix a GPS Tracker GPS that fails to turn on?
If the GPS Tracker fails to turn on, check whether the power wiring and voltage are correct.
Why doesn’t the siren work on my GPS Tracker 403?
The siren may not work because this GPS tracker drives the speaker output voltage DC12V/24V/1A, and it will not drive a negative trigger speaker.
Technical details of the GPS tracker, including dimensions, network, GPS sensitivity, and battery.
Details on configuring GPRS settings for real-time tracking and troubleshooting connection issues.
Instructions for downloading the BAANOOL IoT app and registering a new user account via phone number.
Steps to bind the device to the app using QR code or IMEI and view its real-time position.
Information on registering and logging into the BAANOOL IoT web platform using the same credentials as the mobile app.
Configuring different tracking modes like continuous, interval, and distance-based tracking.
Enabling and disabling the vehicle's engine immobilizer remotely via SMS commands.
Overview of various alarm types including low battery, power disconnection, and blind area alarms.
Activating the SOS alert function for emergency notifications to authorized numbers.
Creating virtual fences to trigger notifications when the tracker enters or exits a defined area.
Configuring alerts when the vehicle exceeds a predefined speed limit.
Procedures for arming and disarming the device via SMS or remote control to activate security features.
Details on alarms triggered when the device is armed, such as door opening or ACC status changes.
Configuring sensitivity levels for vibration, tilt, and shock detection alarms.
Solutions for common issues like failure to turn on, no GSM/GPS signal, and no response to commands.
General| Network | GSM/GPRS |
|---|---|
| GSM Frequency | 850/900/1800/1900 MHz |
| GPS Sensitivity | -159 dBm |
| Voltage | 3.7V |
| Weight | 50g |
| Waterproof Rating | IP65 |
| Storage Temp. | -40°C to 85°C |
| Humidity | 5% to 95% |
| Compatibility | Android, iOS |
| GPS Accuracy | 5 meters |
| Time To First Fix | Cold start 45s, Warm start 35s, Hot start 1s |
| Operation Temp. | -20°C to 55°C |
To Next Page
