34
Note: 123456 is tracker’s password, 04.GPSTrackerXY.com is the DNS, 9000 is
port.
If you want to configure IP instead of DNS, then please send SMS command:
“adminip+password+space+IP+space+port”
6.28.3 GPRS / SMS mode switch
The GPRS mode is the default one, if you need to switch, pls refers to the
following instructions.
6.28.3.1 GPRS mode
SMS command: GPRS+password
Tracker response: GPRS OK! (It means it has been switched to
GPRS mode.)
Example: GPRS123456
TCP / UDP switch
TCP mode is the default one; you don’t need to configure this step if
the web platform works with TCP mode, but you need to configure it
as following when you are using a platform which only works with
UDP.
SMS command to switch to TCP mode: GPRS+password,0,0
SMS command to switch to UDP mode: GPRS+password,1,1
Tracker response: GPRS OK!
Example: GPRS123456,0,0
GPRS123456,1,1
6.28.3.2 SMS mode
Switch to SMS mode will disconnect the GPRS connection for live
tracking.
SMS command: SMS+password
Tracker response: SMS OK! ( It means it has been switched to SMS
mode.)
Example: SMS123456
To Next Page
Loading...
Need help?
General
