22
number, which is 10086 in this example of China Mobile.
6.12 ACC ON/OFF Alert
This function is OFF by default.
SMS command to activate: ACC+password
Tracker Response: ACC ok
Example: ACC123456
If tracker detect “ignition on” signal from ACC wire (white wire), tracker will
send “ACC on+latitude & longitude” to authorize number to tell you the vehicle
has been started. When detect “ignition off” signal, it will send “ACC off+
latitude & longitude” to tell you the vehicle has been stopped.
SMS command to deactivate: noACC+password
Tracker response: noACC ok
Example: noACC123456
It can only activate or deactivate the notification by SMS message to authorized
phone numbers, the notification to web platform cannot be deactivated and will
always send automatically.
6.13 Remote immobilizing
Immobilizing way set up
Immediate execution way: Tracker will immobilize the vehicle immediately
SMS command: quickstop+password
Tracker response: quickstop OK
Example: quickstop123456
Delay execution way (Default setting): When receiving STOP command, tracker will
check speed and reply “it will be executed after speed less than 20KM/H” if speed is
higher than 20KM/H, and delay executing this command until the speed is less than
Received ye from number in the
tracker and process
Forward balance message to mobile phone
To Next Page
Loading...
Need help?
General
