To Next PageTo Next Page
Need help?Do you have a question about the GPS Tracker GSM/GPRS/GPS Tracker and is the answer not in the manual?
General| Brand | GPS Tracker |
|---|---|
| Model | GSM/GPRS/GPS Tracker |
| Category | GPS |
| Language | English |
Guides the physical installation of the tracker device in a vehicle.
Instructions for inserting and configuring the SIM card for network connectivity.
Steps to power on the tracker and ensure it is operational.
Explains the meaning of different LED lights for GSM and GPS status.
Process to initialize the tracker settings via SMS command.
How to modify the device's security password using SMS commands.
Procedures for setting up authorized phone numbers for device control.
How to get the current location of the tracker via SMS or call.
Configure continuous location tracking at set intervals via SMS.
Enables smoother trajectory updates based on vehicle turning angles.
Reduces unnecessary GPS data updates when the vehicle is stationary.
Obtains the tracker's location as a street address via SMS.
Uses cell tower data for location when GPS signals are weak.
Allows listening to the audio environment around the tracker.
Instructions for enabling and managing on-board data storage.
How to upload logged data to a monitoring platform.
Configure the tracker to forward specific SMS messages to other numbers.
Command to check account balance or carrier charges.
Overview of various alarm triggers and their configurations.
Instructions for remotely immobilizing the vehicle engine.
Details on using a remote controller for arming/disarming and other functions.
How to activate the security armed state of the tracker.
Configures the tracker to alarm silently without siren.
How to deactivate the tracker's armed state.
Specific alarms that trigger when the device is armed, like ACC or shock.
Behavior of alarms when GSM network connectivity is lost.
Settings for power-saving sleep modes based on time or sensors.
Configure the tracker to wake up periodically for location reporting.
Command to retrieve the device's unique IMEI number.
How to query the tracker for current status like power and signals.
Procedure to perform a hardware reset of the tracker.
Configure the device's internal clock and timezone.
Switch between TCP and UDP protocols for data transmission.
Method to configure device settings using a USB connection.
Configuration of GPRS network parameters like APN, user ID, and password.
Optimize GPRS data usage to reduce costs.
Change the communication mode between SMS and GPRS.
Designate a center number to receive tracking and alarm data.
Information on accessing web-based tracking and installing PC software.
