GPX Demon 150GR - Spark Plug Replacement

Maintenance and Adjustment
Spark Plug
Remove/Change Spark Plug
• Remove the spark plug cap (B)
• Unthread the plug using a wrench included in the owner’s
tool kit.
• Thread and tighten the new plug in by reversing the
removal steps.
(A) Spark Plug
(B) Spark Plug Cap
23
Specified Spark Plug
NGK DCPR8B
Gap
0.9 mm.
Tightening Torque
12 Nm.
Remove/Change Spark plug
• Remove the spark plug cap (B)
• Unthread the plug using a wrench included in the owner’s
tool kit.
• Thread and tighten the new plug in by reversing the
removal steps.