GPX HT219B - Connecting to a Television; Using the S-Video Output; Using the Composite Video Output; Using the Component Video Output

5
█ USING THE S-VIDEO OUTPUT
Requires an S-Video Cable, not included.
TheS-VideoCableislabelledwiththe
number1inthediagramontheprevious
page.
1. PluganS-VideoCableintotheS-Video
outputontheunit.
2. PlugtheotherendoftheS-VideoCable
intotheS-VideoInputonatelevision.
3. Adjusttheconnectedtelevision’sinput
settingtoS-Video.
This is typically done by pressing a TV/
Video, or Source Button either on the
television or on the television’s remote.
4. Checkthespeakerconnectionsontheunit
toensureaudioplayback.
█ USING THE COMPOSITE VIDEO
OUTPUT
Requires an RCA Video Cable, included.
TheRCACableislabelledwiththe
number4inthediagramontheprevious
page.
1. PlugtheyellowconnectorfromtheRCA
VideoCableintotheVideoOutputonthe
unit.
2. Plugtheyellowconnectorontheother
endoftheRCAVideoCableintothe
VideoInputonatelevision.
3. Adjusttheconnectedtelevision’sinput
settingtoVideo or Composite Video.
This is typically done by pressing a TV/
Video, or Source Button either on the
television or on the television’s remote.
4. Checkthespeakerconnectionsontheunit
toensureaudioplayback.
█ USING THE COMPONENT VIDEO
OUTPUT
Requires a Component Video Cable, not
included.
TheComponentVideoCableislabelled
withthenumbers7,8,and9inthe
diagramonthepreviouspage.
1. PluganComponentVideoCableintothe
ComponentVideoOutputontheunit.
2. PlugtheotherendoftheComponent
VideoCableintotheComponentVideo
Inputonatelevision.
3. Adjusttheconnectedtelevision’sinput
settingtoComponent.
This is typically done by pressing a TV/
Video, or Source Button either on the
television or on the television’s remote.
4. Checkthespeakerconnectionsontheunit
toensureaudioplayback.
CONNECTING TO A TELEVISION