GPX HT219B - Operations; Operations Playing a CD; Using the Auxiliary Inputs

8
OPERATIONS
█ PLAYING A CD
1. Press the Open/Close Button to open the
discdrawer.
2. LoadaCDorCD-R/RWintotheunit.
3. TheCDwill startplayingautomatically.
If the CD does not start playing
automatically, press the Play/Pause
Buttonto begin playing the loaded CD.
• Press the Play/Pause Buttontopausea
CDduringplay.
• Press the Stop Button to stop a CD
duringplay.
• Press the Prev/Tun-andNext/Tun+
Buttonstoskipbetweentracksona
loadedCD.
Press the Rewind & Fast Forward
Buttonstorewindandfastforward
throughaloadedDVDorCD.
• Press the Repeat Buttononcetorepeat
thecurrenttrack,andtwicetorepeatthe
entirealbum.PresstheRepeat Button a
thirdtimetoturntherepeatfunctionoff.
█ USING THE AUXILIARY INPUTS
1. ConnectanMP3Playerorotheraudio
sourcetotheAuxiliary Input.
2. Press the Power Button toturntheunit
on.
3. Press the Source Button toswitchthe
unittoAux Mode.
Usetheconnecteddevice’scontrolsto
controltheaudioplayingthroughtheunit.