GPX HT219B - DVD Operations; Programming a DVD; Repeat and Repeat A-B; Searching a Loaded DVD

7
DVD OPERATIONS
█ PROGRAMMING A DVD
1. WhileaDVDisplaying,presstheProg/
Mem Buttonontheremotecontrol.
2. Use the Number Keypad to type the
titlenumberintotherstblank,andthe
chapternumberintothesecondblank.
3. Repeatstep2untilthedesiredchapters
areprogrammed,thenpressthePlay
Button.
4. Tocanceltheprogram,pressthe
Program Button,highlight"Clear
Program"andpresstheEnter Button on
the remote.
█ REPEAT AND REPEAT A-B
• Press the Repeat Buttononcetorepeat
thecurrentchapter,twicetorepeatthe
currenttitle,andthreetimestoturnthe
repeatfunctionoff.
• Press the A-B Button to repeat a
speciedsectionofaDVD.Pressonce
tocreateastartingpoint(A),andpressa
secondtimetocreateanendingpoint(B).
Press the A-B Buttonathirdtimetoturn
theABRepeatFunctionoff.
█ SEARCHING A LOADED DVD
1. WhileaDVDisplaying,presstheSearch
Button on the remote.
2. Press the UpandDown Buttons on the
remotetoswitchbetweensearchingfora
Title,Chapter,orspecicTime.
3. Use the Number Keypad on the remote
totypeinaTitle,Chapter,orSpecic
Time.
4. Press the Enter Button on the remote to
godirectlytotheenteredTitle,Chapter,
orSpecicTime.
5. Press the Search Buttonatanytimeto
exittheSearchMode.