12
Connecting a Computer
Requires a PC with a VGA output, and a VGA cable (not included).
1. Connect the computer’s VGA output to the VGA/PC Input on the television.
2. Press the Source button to switch to the PC Mode.
3. Audio from the connected PC can be input to the television through the TV’s PC Audio Input by using a 3.5mm
audio cable (not included).
Connecting Devices to Your TV
Connecting Composite Audio/Video
Requires composite video (yellow) and RCA stereo (red, white) cables (not included).
1. Connect the audio output on your media device to the Stereo Audio input on the television with RCA stereo
audio cables (red, white).
2. Connect the Video Output on your media device to the Video Input on the television with a Composite Video
cable (yellow).
3. Press the Source button to switch to the connected input AV Composite.
Connecting Optical Audio
Requires an audio receiver with a Digital Optical Input and a Digital Optical Audio Cable (not included).
1. Connect the Digital Optical Audio Cable from the Optical Output on the television to the Optical Input on
the audio receiver.
2. Set the receiver to accept the Optical Input source from the television.
Please Note: Home theater systems may label the Digital Optical Out source differently, such as “PCM” or“Digital
Audio Input”. Please consult your home theater system’s user manual in order to select the correct input source.
If there is no sound, be sure the Digital Audio Output is set to PCM. The setting can be found in the TV Setup menu.
To Next Page
