Temperature Display
GMC-320 installed an internal temperature sensor.
Press the S2 to S4 to toggle the temperature unit. Use S1 to exit the temperature screen.
Gyroscope Data Display
The internal digital accelerometer is able to provide real-time gyroscope data. It displays
current unit X,Y,Z axis data and detected motion event. Such as single tap OR double tap.
Communication Baud Rate
This Geiger counter serial communication baud rate is selectable from following value:
1200,2400,4800,9600,14400,19200,28800, 38400,57600,115200. Press S4 key changes baud
rate.
The new baud will take immediate effect. The new value also be saved and used on next
power up.
Reverse Display
To Next Page
Loading...
