grabner TRIMARAN - Page 22

22
 Attach the mainsheet block of the AD-
VENTURE by means of the shackle to
the D-Ring bonded to the oor.
 With the ADVENTURE SL and SPEED
attach the mainsheet block to the line
laid across between the seat board xing
eyelets to port and starboard.
 Alternatively you may bond a D-Ring bra-
cket (not supplied) for attachment to the
oor.
 Shackle the guide roller to the clew eye-
let of the mainsail
 Secure the end of the mainsheet by
knotting it to the mainsheet-block.
 Feed the other end of the mainsheet over
the guide roller and back to the mains-
heet-block, over the pulley into the cleat.
If you have auxiliary wooden oor co-
vering, an eye bracket is supplied and to be
afxed to the ooring, to which the mains-
heet-block can be attached.