Troubleshooting
3A5414A 9
Troubleshooting
Diagnostic Logs
• Login History
• Configuration Log
• Device Events
• Device Status Report
• System Configuration
• Calibration History
• Firmware Update
Problem Cause Solution
HUB will not communicate
with devices (meters, PAC’s,
and TLMs)
HUB is not powered up Verify HUB is powered up
HUB is out of RF range of
meters or TLMs
Ensure HUB is located
within RF range of meters
and TLMs
Weak or no RF signal Changes/obstructions in RF
pathway (i.e., vehicles,
overhead doors, etc.)
Add Graco Extender to
Pulse system. Order Graco
Part No. 17F885 - US,
17F776 - EU, 17F887 - UK,
17F888 - ANZ.
FIG. 8
To Next Page
Loading...