To Next PageTo Next PageWhat to do if the indicator is stuck in alert position in my Graco Water Filtration System?
If the indicator is stuck in the alert position, it could be due to a clogged filter or a broken indicator. Try replacing the filter first. If the issue persists, the indicator itself may need to be replaced.
Why is my Graco Water Filtration System leaking around the bowl, indicator, or drain plug?
Leakage around the bowl, indicator, or drain plug of your Graco Water Filtration System is typically due to a loose fitting or a broken seal. Ensure the fitting is tightened. If tightening doesn't resolve the issue, replace the seal with a seal kit.
General| Brand | Graco |
|---|---|
| Model | 25M212 |
| Category | Water Filtration Systems |
| Language | English |
Details critical hazards of high-pressure fluid injection, including necessary immediate action and preventative measures.
Outlines risks associated with operating equipment improperly, including fatigue, substance influence, and exceeding limits.
Addresses dangers from toxic fluids and fumes, emphasizing SDS review and proper storage/disposal of hazardous materials.
Explains the necessity of grounding equipment to prevent static sparking and potential ignition of fumes or explosive atmospheres.
Provides step-by-step instructions for installing a fluid drain valve, emphasizing pressure relief before starting.
Details the installation of a dual filter system, allowing for filter service without interrupting fluid flow.
Describes how to install a filter bypass system, enabling fluid diversion around the filter for maintenance.
Instructs on flushing the equipment with a compatible solvent to remove testing oil before introducing actual process fluid.
Details the critical steps for safely relieving system pressure before maintenance or servicing.
Identifies common issues like leaks and indicator malfunctions and provides corrective actions.
Step-by-step guide for replacing the filter element when it becomes dirty or clogged.
Instructions for replacing O-rings that seal the filter bowl to prevent leaks.
Guidance on replacing the indicator assembly and its associated O-rings if malfunctioning.
Diagrams and a detailed list of all components and their part numbers for the Red Alert Filter.
Information on available kits and optional accessories for the filter system.
Provides the physical measurements of the Red Alert Filter unit.
Details the required space and mounting hole specifications for installation.
Lists key performance metrics, filter specifications, wetted parts, and weight.
Outlines the terms and conditions of Graco's standard warranty for the equipment.
Provides contact details and website for additional product information and support.
