Graco 65 - Attaching Harness Straps to Splitter Plate

34
Attach harness straps
to splitter plate.
5
(When using harness slot 1)
s0UTTopRIGHTSTRAPLOOPONSPLITTERPLATElRST
then attach Top left strap loop (fig. g - fig. h).
OR
(When using harness slots 2 or 3)
s0UTMiddleRIGHTSTRAPLOOPONSPLITTERPLATElRST
then attach Middle left strap loop. (fig. j - fig. k).
NOTE:-AKESUREENDSOFSTRAPSAREINFRONTOF
splitter plate (fig. i or fig. l).
(When using harness slots 4 or 5)
s0UTBottom right strap loop on splitter plate
lRSTTHENATTACHBottom left strap loop (fig. m - fig. n).
CHECK that the loops are completely within the splitter plate
(fig. o).
For Infants or Small Toddlers:
For Toddlers:
Top
Loop
Middle
Loop
Bottom
Loop
Slot
1
Slot
2
Slot
3
Slot
4
Slot
5